Mjk-automation Shuttle Ultrasonic Level Transmitter and Sensor Manual de usuario descargar pdf (Pagina 14)

GB Shuttle Manual 100316

SW 838023

Display and keyboard

Get started

Applying power

When Shuttle

is connected to power for the ﬁrst time, the fol-

lowing texts (Choose Sensor Press Enter) will appear across

the display:

Press "Enter" once to select the required sensor type.

When "No Sensor" (no S) is displayed, press the 'Up' or

'Down' arrow key to leaf through the different sensor types:

2005xx and 2006xx.

When the required sensor type appears on the display (here:

200570), press "Enter" once.

The sensor type is now registered by the level transmitter,

and "Press Enter" passes across the display to indicate that

you may continue with setting/measuring a level of 0 meter

(nil, empty tank).

Press "Enter" once to proceed with the initial settings.

Notes:

When a sensor type has been selected, the factory set-

tings will have no inﬂuence on this selection.

If you choose "No Sensor" (no S), the Shuttle will

invoke the choose sensor menu at start-up. From this

point the correct sensor type can be selected.

Sensor type selection

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 69 70

Sin comentarios

Mjk-automation Shuttle Ultrasonic Level Transmitter and Sensor Manual de usuario Pagina 14